Document LTP0101 rev 2.1f
Setting Operating Mode
- Press "Mode / Enter" button until desired mode is displayed.
- After a certain amount of time, the display will show the selected mode and current water temperature.
- Heating Mode - After fan and compressor starts, the red "Heating" light will activate.
- Cooling Mode - After fan and compressor starts, the blue "Cooling" light will activate.
- Holding Mode - After fan and compressor starts, the heat pump will attempt to maintain the set temperature within 3°. The red "Heating" or blue "Cooling" light will activate.
- Off - The heat pump will indicate it is deactivated. The current water temperature will be displayed.
Heating / Cooling modes only available on select equipment. Confirm heat pump features before setting a mode.